Missing detectors and the importance of an independent, qualified verification process
Fire safety is one of the most fundamental elements of any construction project. Standards such as BS 5839-1 are in place precisely to prevent oversight and inconsistency, yet problems still slip through the net. One of the most striking examples in recent memory involved a verification audit undertaken by On Point Associates, which revealed missing fire detectors at the final stage of a project—an issue neither identified by the supply chain nor documented on any certification.
Even more concerning, the project manager’s response was not to correct the problem, but to claim the detectors could be “risk assessed away.” This decision was neither recorded nor communicated to the wider project team. It raises an uncomfortable but essential question: how, with so many stakeholders involved, can something so fundamental be overlooked?
This paper examines where the breakdowns occurred, what role each stakeholder should have played, and why independent, accredited oversight is essential if we are to prevent such lapses in the future.
The Incident: Missing Detectors and Risk Assessment
During a late-stage verification audit, missing detectors were found in key areas of a building—just one day before Building Control was due to sign off. Instead of addressing the omission, the fire contractor’s project manager sought to remove the detectors from scope without consultation. This was not reflected in the certification, leaving other stakeholders unaware of the decision and the associated risk.
The fact that the project had advanced this far without the error being identified by the designer, installer, commissioning engineer, electrical contractor, main contractor, commissioning management team, or electrical consultant points to a breakdown in both technical oversight and accountability.
Key Issues Identified:
- Failure to Document Missing Detectors: The project manager failed to communicate or document the omission of the detectors, leaving other stakeholders unaware of the issue.
- Lack of Transparency in Risk Assessment: The decision to omit detectors was not communicated to or approved by interested parties, contravening best practices and jeopardising fire safety.
- Breakdown in Technical Knowledge and Authority Across the Supply Chain: Despite the involvement of multiple stakeholders, none had the technical expertise or authority to hold the fire contractor accountable for this non-compliance with BS5839-1.
Roles and Missed Opportunities by Stakeholders:
- Fire System Designer: Responsible for creating a compliant system adhering to BS5839-1. The design review process should have identified the missing detectors. A third-party consultancy could have independently verified compliance and flagged this oversight.
- Installer: Tasked with implementing the system according to the design. The omission of detectors should have been caught and corrected during installation and reported on the installation certificate. Early audits by accredited consultancies could have detected the issue.
- Commissioning Engineer: Responsible for testing the system’s functionality and checking it against the approved design. The missing detectors should have been identified during commissioning and reflected in the commissioning certificate. Independent verification would have ensured compliance with BS5839-1.
- Electrical Contractor: Ensures the proper installation of all electrical components of the fire detection system. The omission may have been overlooked due to reliance on internal documentation. Third-party oversight would have ensured compliance.
- Main Contractor: Oversees the project and ensures compliance with regulatory requirements, including fire detection systems. The main contractor should have identified the missing detectors. Third-party consultancy involvement would have provided accountability.
- Commissioning Management: Ensures all systems are operational and meet standards, including BS5839-1. Missing detectors should have been flagged by the commissioning team. Accredited consultants would have identified this design shortfall.
- Electrical Consultant: Responsible for reviewing and approving the fire system’s electrical design to ensure safety standards are met. Independent design verification by accredited consultancies could have identified the omission.
Why independent oversight matters
The case illustrates a wider issue: when responsibility is spread across multiple parties, accountability can become diluted. Without an independent, accredited consultancy providing oversight, there is no guarantee that BS 5839-1 will be applied consistently or that shortcomings will be challenged.
Third-party accredited consultancies, such as those registered under BAFE or LPS 1014, bring three vital elements:
- Accredited Expertise in Fire Safety Compliance: Consultancies certified under LPS 1014 or BAFE possess the expertise to audit fire systems against stringent standards. Their knowledge ensures compliance with BS5839-1 and that any design flaws are promptly addressed.
- Independent Oversight and Accountability: Third-party consultancies provide an objective, independent perspective that prevents conflicts of interest. In this case, independent involvement could have challenged the project manager’s decision to omit detectors and ensured transparency.
- Reducing Risk and Ensuring Compliance: Engaging third-party consultancies early in the project lifecycle enables early detection of issues like missing detectors, ensuring compliance with BS5839-1 and reducing the risk of non-compliance, delays, or costly rework.
Conclusion
The omission of detectors on this project was not simply a technical error, it was a failure of the entire project’s quality management process. Each stakeholder had an opportunity to intervene, yet the issue remained undetected until the final verification. Worse still, the proposed resolution was to bypass compliance altogether, without transparency or approval.
This incident highlights why independent, accredited consultancies must be engaged as standard practice. By providing objective verification against BS 5839-1, they close the gaps left by fragmented supply chains and ensure accountability where it matters most.
In fire safety, “near enough” is never good enough. Robust, independent verification provides the safeguard needed to ensure that nothing is allowed to slip through the net.